Plastic CNC Machining service
The use of double tool lathes to process the same workpiece, if using a different process, the efficiency will be a lot of difference. The core here is the balance of cycle time, ie processing time. Among them, one is the balance between the processing time between the front and the back of the two processes, and the second is the balancing of the processing time between the top and bottom tool carriers in each process. If the measures are reasonable, the ergonomics can be improved a lot. As shown in Figure 1 and Figure 2 is a bearing inner ring before and after the two processes. In the previous process, the T1 and T2 tools are mounted on the upper tool holder, and the T3 and T4 are installed on the lower tool holder. After the process, the T1, T2, and T3 tools are mounted on the upper tool holder, and the T4, T5, and T6 tools are installed on the lower tool holder. . Our Advantages of CNC Machining Our engineers can handle c…
A Video Interactive Platform For Global Opportunities
Copyrights © 2024 jstmtz.com All Rights.Reserved .