Screw and Barrel for HDPE and LDPE Material
Specification: Screw Diameter: D15-D300 L/D ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and vented type etc. Technical Information Base Materials: (1)38CrMoAlA(JIS SACM645) (2)42CrMo(AISI 4140) (3)4Cr5MoSi V1 (JIS SKD-61) (4)9Cr18MOV (5)HPT Bimetallic alloy materials: (1)Fe-based alloy (2)Ni-based alloy/Deloro alloy (3)Co-based alloy (4)NiCo-based alloy (5)Tungsten carbide/Wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000HV Nitrided brittleness: Less than grade 1 Surface roughness: Ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: ≥ 950HV Chrome-plating layer depth: 0.025-0.…
A Video Interactive Platform For Global Opportunities
Copyrights © 2024 jstmtz.com All Rights.Reserved .